16-Element Dual Anti-jamming Terminal Anti-jamming Enhanced Anti-Spoofing

Short Description:

Anti-Jamming Capability:
ISR: Single ≥110dB Seven ≥95dB Fifteen ≥80dB
Anti-spoofing performance:
Output residual spoofing signal CN0:≤20dB
Measurement:Φ370mm×28.7mm
Power Consumption: ≤40w
Weight: ≤ 2600g
Output signal frequency: 1561.098MHz1575.42MHz
Supported GNSS constellations：BDS-B1I,GPS-L1C/A ,GAL-E1

Product Detail

Product Tags

Product Introduction

Product Overview

The BGS-16CH-AJAS-02 is a high‑end satellite navigation anti‑jamming terminal designed for industrial users who demand the highest level of resilience. It supports BDS‑B1i and GPS‑L1 frequencies, featuring both anti‑suppression jamming (up to 15 simultaneous jammers) and enhanced anti‑spoofing capabilities. The terminal integrates a 16‑element antenna array, advanced anti‑jamming processing, anti‑spoofing modules, and a built‑in GNSS receiver (ublox M10). It protects user platforms from unintentional interference and malicious attacks, significantly enhancing PNT (Positioning, Navigation, Timing) information security for UAVs, unmanned vehicles, and other critical applications.

Key Features

1. 16‑Element Array – Resists Up to 15 Jammers

16‑channel anti‑jamming architecture enables suppression of up to 15 simultaneous jammers with industry‑leading jamming‑to‑signal ratios

2. RNSS Signal Reception

Receives BeiDou and GPS navigation satellite signals
Civil codes: BDS‑B1i, GPS‑L1

3. Broad‑Spectrum Anti‑Jamming

Suppresses narrowband, broadband, pulse, swept frequency, Gaussian, and other jamming types on BDS‑B1 and GPS‑L1
Anti‑jamming performance (J/S ratio, zero adjustment):
- Single jammer: ≥110 dB
- Seven jammers: ≥95 dB
- Fifteen jammers: ≥90 dB

4. Enhanced Anti‑Spoofing

Defeats asynchronous, synchronous, and replay spoofing attacks on L1 and B1 frequencies
Residual spoofing signal CN₀ (Carrier‑to‑Noise Ratio): ≤20 dB
Delivers clean, authentic signals to the backend receiver

5. Built‑in High‑Performance Receiver

Default receiver: ublox M10
Outputs NMEA‑0183 ASCII or ublox protocol data

6. Software Upgrade

Field upgradeable via serial port for both the anti‑jamming module and receiver module

7. System Self‑Test

Power‑on self‑test and continuous status monitoring

8. Fire Resistance (Anti‑burn)

Continuous wave withstand power: ≥10 W

9. Safety Protections

Overvoltage protection and reverse connection protection

Electrical & Performance Specifications

Parameter	Value
Operating Frequency	BDS‑B1: 1561.098 MHz ±2.046 MHz GPS‑L1: 1575.42 MHz ±2.046 MHz
Anti‑jamming Performance (J/S, zero adjustment)	Single: ≥110 dB Seven: ≥95 dB Fifteen: ≥90 dB
Anti‑spoofing Performance	Residual spoofing CN₀ ≤20 dB
Positioning Accuracy (no jamming)	Horizontal ≤1.5 m (95%) Vertical ≤1.5 m (95%)
Positioning Accuracy (with jamming)	Horizontal ≤10 m (95%) Vertical ≤10 m (95%)
Velocity Accuracy	≤0.2 m/s (95%)
Timing Accuracy	≤100 ns (95%)
Operating Voltage	12 – 34 V DC (28 V recommended)
Power Consumption	≤40 W

Interface Definition

Power / Data Connector (J30J‑15ZK)

Pin No.	Pin Name	Direction	Level	Remarks
1–5	Positive pole (+)	Power input	12–34 V	28 V recommended
6–10	Negative pole (-)	Power input	–	Ground
11	TXD0	Output	TTL	Anti‑jamming serial port
12	RXD0	Input	TTL	Anti‑jamming serial port
13	RXD1	Input	TTL	Receiver serial port
14	TXD1	Output	TTL	Receiver serial port
15	GND	–	–	Signal ground

RF Interface

Connector type: SMA (single coax)
Output signal level: -70 ~ -60 dBm
Function: Provides cleaned anti‑jammed RF signal for direct connection to a backend GNSS receiver

Mechanical Structure

Item	Specification
Dimensions	Φ370 mm × 28.7 mm (circular)
Weight	≤2600 g
Color	Light grey

Environmental Adaptability

Condition	Specification
Operating Temperature	-40°C ~ +55°C
Storage Temperature	-55°C ~ +70°C
Relative Humidity	96% RH at 40°C
Rain Test	Meets GJB150A requirements

Typical Application Scenarios

Time synchronization security in power, telecommunications, and finance
Navigation safety for UAVs, unmanned vehicles, and unmanned ships
Fleet defense and navigation security
High‑end logistics navigation safety

Installation & Use

Mounting

Install and secure using appropriate hardware (customer‑provided).

Power Supply

XT30 male connector; input voltage 12–34 V DC (max 34 V, 28 V recommended).

Data Connection (choose one of two modes)

Mode 1: Serial output (direct connection to flight controller)

Use the provided data cable to connect the TTL serial port to the flight controller’s GNSS serial port:
- TX (product) → FC RX
- RX (product) → FC TX
- GND → FC GND
Outputs NMEA‑0183 or ublox protocol positioning data.

Mode 2: RF output

Connect the product’s RF port (SMA) to the drone’s antenna input port using an SMA cable.
Important: The connected device must NOT supply more than 5 V to this RF port to avoid power conflicts or damage.

⚠️ When using a USB‑to‑TTL tool to connect to a computer, do not hot‑swap the USB to avoid damaging the serial port.

Flight Controller Protocol Compatibility

This product uses the ublox M10 receiver by default and can output NMEA‑0183 ASCII protocol or ublox protocol. The flight controller must be configured to receive one of these protocols. Please coordinate protocol integration with our technical team before ordering.

Disclaimer

This product is designed to enhance satellite navigation security. Please comply with all applicable laws and regulations during use. The manufacturer is not responsible for any illegal activities conducted using this product.

BGS-16CH-AJAS-02 – 16‑element, dual anti‑jamming + anti‑spoofing, ultimate protection for the most demanding navigation security missions